Copycat See's Fudge Recipe (2024)

FAQs

What is the secret to smooth fudge that is not gritty? ›

While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

1930, this is “supposedly” the original recipe for See's Fudge, produced by the See's Candy Company, Los Angeles.

However, if you don't beat it at all, the crystals won't form properly, so your fudge won't set. If you forget to beat the fudge, try heating it back up over low heat, then beat it once it's slightly softened. If you beat the fudge too soon, the crystals will be too large, and the fudge will be grainy.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Cooking is necessary to dissolve sugar crystals and to evaporate part of the water in the cream. The length of this step has a direct impact on the firmness of the fudge. As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F).

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

Grainy Fudge

The sugars probably crystallized, a common mistake when making candy like fudge or caramel. If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon.

If you discover that your mixture is grainy, some quick thinking will save the entire batch. Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using.

See's candies are made from fresh ingredients sourced almost exclusively in state. Like Teuscher, See's has never used preservatives, and for most of its existence the company has been family-owned and operated.

Hello, Berkshire Hathaway! See's Candies became part of the Berkshire Hathaway family in January 1972, when Warren Buffett and Charlie Munger purchased the company. To this day, See's is one of Warren's favorite businesses!

Did Warren Buffett buy See's candies? ›

Buffett purchased See's Candies in 1972 for $25 million.

The CEO of Berkshire Hathaway Inc., Warren Buffett, a billionaire, has many investments. However, his favorite is in See's Candies, according to Yahoo! Finance.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

OPTION 4) If you think the reason it didn't set was because you didn't heat it to the right temperature, you could try putting it back into the pan and re-cooking.

Stir Constantly: Stir the fudge mixture continuously, especially during the melting process, to prevent burning and ensure even cooking. Use Sweetened Condensed Milk: Sweetened condensed milk adds sweetness and creaminess to fudge, creating a smooth texture.

If the sugar crystals are not properly dissolved before cooling, they can create a gritty texture. To avoid this, ensure that you stir the fudge mixture consistently and remove any sugar crystals that form on the sides of the pan using a wet pastry brush.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.